Ivano LIPPI – 17/06/2003
Trigger
Configurations
There are 4 basic Trigger Configurations : one is the default and the three other have a subset of the parameters modified for special purpose.
·
default is
the reference configuration.
|
BTI |
||||||||||
Parameter |
ST43 |
RE43 |
DEAD |
XON |
RON |
SET |
LTS |
AC1 |
AC2 |
ACH |
ACL |
Bit
Setting |
41 |
1 |
30 |
0 |
0 |
111 |
11 |
00 |
11 |
01 |
10 |
|
TRACO |
||||||||
Parameter |
HISM |
HTPRF |
HTMSK |
LTMSK |
SLMSK |
PRGCOMP |
LTF |
LTS |
REUSEI/O |
Bit
Setting |
0 |
1 |
0 |
0 |
0 |
10 |
0 |
0 |
1 |
|
TSS |
TSM |
|||
Parameter |
CARRY |
GHOST1 |
GHOST2 |
CARRY |
GHOST |
Setting |
enabled |
enabled |
enabled |
enabled |
enabled |
·
synchro is
especially used for the synchronization procedure.
All Low Trigger are disabled and the correlation tolerance is tightened :
|
TRACO |
TSS |
|||
Parameter |
LTS |
HTMSK |
LTMSK |
PRGCOMP |
THCRL |
Bit
Setting |
1 |
1 |
1 |
01 |
011 |
·
debug is
especially used to check the BTI and TRACO performance.
The TSS and TSM actions are neutralized and the data of a single TRACO is output :
|
TSS |
TSM |
||||
Parameter |
CARRY |
GHOST1 |
GHOST2 |
TRMSK |
CARRY |
GHOST |
Setting |
disabled |
disabled |
disabled |
only 1 Traco enabled |
disabled |
disabled |
·
backup is
used to check the backup running mode of the TSM.
Both the TSMD
are run in backup mode, no other chip is touched.
synchro
The synchronization procedure was used also to find the best Drift Velocity estimate.
3 different settings were used with three different drift velocity values:
Name |
ST43 |
RE43 |
DEAD |
corresponding to |
sync381 |
40 |
2 |
29 |
Tmax = 381.2
ns Vdrift = 55.1 µm/ns |
sync388 |
41 |
1 |
30 |
Tmax = 387.5
ns Vdrift = 54.2 µm/ns |
sync394 |
42 |
0 |
30 |
Tmax = 393.7
ns Vdrift = 53.3 µm/ns |
default
17 different trigger configurations were tested varying a single parameter :
Name |
Chip |
Modified Parameter |
Description |
default |
|
none |
|
T01def |
TSS |
THCRL = 001 |
Only High Theta Passed to Traco |
T02def |
TRACO |
LTMSK = 1 |
Single Low Always Discarded |
T03def |
BTI |
LTS = 00 |
Low Trigger Suppression Disabled |
T04def |
BTI in Theta |
LTS = 00 |
Low Trigger Suppression Disabled |
T05def |
BTI |
ACx = 01 |
All Tolerance Parameters to 1 |
T06def |
BTI |
ACx = 10 |
All Tolerance Parameters to 3 |
T07def |
TRACO |
LTS = 1 |
Low Trigger Suppression Enabled |
T08def |
TRACO |
PRGCOMP = 01 |
Correlation Tolerance to 1 |
T09def |
TRACO |
PRGCOMP = 11 |
Correlation Tolerance to 3 |
T10def |
TSS e TSM |
CARRY = 1 |
Carry Disabled in all TS system |
T11def |
TSM |
HINREC = 1 |
Recover High Inner Enabled |
T12def |
TSS |
GHOST2 = 1 |
Ghost Type 2 Rejection Disabled |
T13def |
TSS e TSM |
GHOST1 & 2 = 1 |
Ghost Type 1 & 2 Rejection Disabled |
T21def |
TRACO |
HTMSK = 1 |
Single High Only with Theta |
T22def |
TRACO |
SLMSK = 1 |
Single Outer Preferred |
T23def |
TRACO |
HTPRF = 0 |
High Quality Ignored in Sorting |
T24def |
TRACO |
REUSEI/O = 0 |
Disable Recycling of Uncorrelated |
debug
9 different trigger configurations were tested varying a single parameter :
Name |
Chip |
Modified Parameter |
Description |
debug |
|
none |
|
T01deb |
TSS |
THCRL = 001 |
Only High Theta passed to Traco |
T02deb |
TRACO |
LTMSK = 1 |
Single Low always discarded |
T03deb |
BTI |
LTS = 00 |
Low Trigger suppression Disabled |
T04deb |
BTI in Theta |
LTS = 00 |
Low Trigger suppression Disabled |
T05deb |
BTI |
ACx = 01 |
All Tolerance parameters to 1 |
T06deb |
BTI |
ACx = 10 |
All Tolerance parameters to 3 |
T07deb |
TRACO |
LTS = 1 |
Low Trigger suppression Enabled |
T08deb |
TRACO |
PRGCOMP = 01 |
Correlation Tolerance to 1 |
T09deb |
TRACO |
PRGCOMP = 11 |
Correlation Tolerance to 3 |
backup
6 different backup mode options of TSM were tested :
Name |
Description |
backup |
|
T01bck |
Single Outer Disabled |
T02bck |
Single Low Enabled |
T03bck |
Uncorrelated Disabled |
T04bck |
Single Low Enabled + Carry
Disabled |
T05bck |
Single Low Enabled + Carry
Disabled + Single Outer Disabled |
T06bck |
Single Low Enabled + Carry
Disabled + Single Outer Disabled + Consecutive Disabled |